MASU+ Fib [BTT] at a glance
| Kind of rule | Time of day (session and opening range) |
|---|---|
| Buys or sells | It can buy, and it can bet on falling prices. |
| Built on | ADX / DMI, ATR, Bollinger Bands, Donchian Channels, EMA, Fibonacci, Pivot points, RSI, SMA, Standard deviation, VWAP, WMA, percent rank, pivot low, running total |
| Where it was published | TradingView, by its author, as a Pine Script strategy |
| Tested on | 12 cells: 12 coins, October 2021 to June 2026, no fee |
| Trades placed | none |
| Page updated | 2026-11-08 |
MASU+ Fib [BTT] backtest results, every cell
There is no cloud of cells to draw. The frame below says why.
How MASU+ Fib [BTT] works
Rules in this group usually work like this. It only acts during set hours, such as the London or New York morning. Crypto never closes, so those hours are a choice, not a fact of the market. The question is whether those hours behave the same way on more than one coin. The next paragraph is this particular rule, which can be narrower than the group.
It can buy, and it can bet on falling prices. It acts only when several checks agree at once. It leans on ATR, DMI, EMA, percent rank; those names are explained on their own pages, further down. The exact line is in the list below, in the author's names, and you can skip that list. When it enters, it also sets a stop or a target, so a trade can close without a new signal.
Each trade uses 10 percent of the account. It holds one trade at a time.
The exact condition, from the code
Same rule, translated from the code, in the author's names. You can skip this list if the paragraph above was enough.
- Enters long when (trend long or breakout long or mean reversion long) and (not (Use MTF Filter (on)) or multi-timeframe bullish) and (not (Use MA Ribbon (on)) or ribbon bullish) and (not (Enable Order Flow Analysis (on)) or of bullish or the close is above VWAP) and fib filter long and not (Trade Only During Session (on)) and no position is open.
- Enters short when (trend short or breakout short or mean reversion short) and (not (Use MTF Filter (on)) or multi-timeframe bearish) and (not (Use MA Ribbon (on)) or ribbon bearish) and (not (Enable Order Flow Analysis (on)) or of bearish or the close is below VWAP) and fib filter short and not (Trade Only During Session (on)) and no position is open.
- Places a stop at (the close − (the 14-period ATR × Stop Loss ATR Multiplier (2))), a trailing stop when (trend long or breakout long or mean reversion long) and (not (Use MTF Filter (on)) or multi-timeframe bullish) and (not (Use MA Ribbon (on)) or ribbon bullish) and (not (Enable Order Flow Analysis (on)) or of bullish or the close is above VWAP) and fib filter long and not (Trade Only During Session (on)) and no position is open and Use Trailing Stop (on).
- Places a stop at (the close − (the 14-period ATR × Stop Loss ATR Multiplier (2))), a target at (the close + (the 14-period ATR × Take Profit ATR Multiplier (3))) when (trend long or breakout long or mean reversion long) and (not (Use MTF Filter (on)) or multi-timeframe bullish) and (not (Use MA Ribbon (on)) or ribbon bullish) and (not (Enable Order Flow Analysis (on)) or of bullish or the close is above VWAP) and fib filter long and not (Trade Only During Session (on)) and no position is open and not (Use Trailing Stop (on)).
- Places a stop at (the close + (the 14-period ATR × Stop Loss ATR Multiplier (2))), a trailing stop when (trend short or breakout short or mean reversion short) and (not (Use MTF Filter (on)) or multi-timeframe bearish) and (not (Use MA Ribbon (on)) or ribbon bearish) and (not (Enable Order Flow Analysis (on)) or of bearish or the close is below VWAP) and fib filter short and not (Trade Only During Session (on)) and no position is open and Use Trailing Stop (on).
- Places a stop at (the close + (the 14-period ATR × Stop Loss ATR Multiplier (2))), a target at (the close − (the 14-period ATR × Take Profit ATR Multiplier (3))) when (trend short or breakout short or mean reversion short) and (not (Use MTF Filter (on)) or multi-timeframe bearish) and (not (Use MA Ribbon (on)) or ribbon bearish) and (not (Enable Order Flow Analysis (on)) or of bearish or the close is below VWAP) and fib filter short and not (Trade Only During Session (on)) and no position is open and not (Use Trailing Stop (on)).
| Buys or sells | It can buy, and it can bet on falling prices. |
|---|---|
| Tools it calculates | ADX / DMI, ATR, Bollinger Bands, Donchian Channels, EMA, Fibonacci, Pivot points, RSI, SMA, Standard deviation, VWAP, WMA, percent rank, pivot low, running total |
| A second chart speed | Yes. It also looks at a second chart speed. |
| Only at certain hours | Yes. It only acts during set hours. |
| Adding to a trade | It holds one trade at a time. |
| How much it trades | Each trade uses 10 percent of the account. |
| Cost the author assumed | The author assumed no trading cost. |
Default settings
The test used the defaults in the middle column. Nothing was turned to help a coin.
| Setting | Default | Group |
|---|---|---|
| symbol group | Auto | |
| Use Adaptive Parameters | on | Strategy Settings |
| Base Timeframe | 15 | Strategy Settings |
| Trade Only During Session | on | Time Filter |
| Trading Hours | 0900-2200 | Time Filter |
| Trend EMA Fast | 21 | Trend Following |
| Trend EMA Slow | 50 | Trend Following |
| Trend Filter EMA | 200 | Trend Following |
| Use MTF Filter | on | MTF Filter |
| Higher Timeframe | 240 | MTF Filter |
| MTF EMA Fast | 21 | MTF Filter |
| MTF EMA Slow | 55 | MTF Filter |
| Use MA Ribbon | on | MA Ribbon |
| Ribbon MA Type | EMA | MA Ribbon |
| Ribbon MA 1 | 8 | MA Ribbon |
| Ribbon MA 2 | 13 | MA Ribbon |
| Ribbon MA 3 | 21 | MA Ribbon |
| Ribbon MA 4 | 34 | MA Ribbon |
| Ribbon MA 5 | 55 | MA Ribbon |
| Ribbon MA 6 | 89 | MA Ribbon |
| Ribbon MA 7 | 144 | MA Ribbon |
| Ribbon MA 8 | 233 | MA Ribbon |
| Ribbon Alignment Threshold | 6 | MA Ribbon |
| Enable Order Flow Analysis | on | Order Flow |
and 51 more settings, left at the author's defaults.
How the backtest was run
Every strategy was tried the same way, on the settings the author published.
The years are October 2021 to June 2026. The prices are from Bybit, for 13 widely traded coins, mostly on hourly, 4-hour and daily charts, with some faster charts. That was 47,242 tries. The window stored in the files is 2021-09..2026-06.
599 rules produced a finished try. A rule that finished above zero on at least 12 cells, before any fee, was tried again with a fee of 0.12 percent per side. Only buys are counted in that second try. 273 rules got it.
The method, the aggregate results and a downloadable table are on the study page. What the desk does with the results beyond these pages is its own.
Before any fee, it was tried on 12 cells, and it placed no trades.
It was not run a second time with a fee. That second pass happens only when at least 12 cells finished above zero before fees. 273 rules got that pass.
| Cells tried | 12 |
|---|---|
| Cells that placed a trade | 0 |
| Finished above zero | 0 |
Label: backtest · old prices, zero commission · Oct 2021 – Jun 2026. Hypothetical results; see the risk disclosure.
How to read the result
How to read the number
No cell took a trade, so there is no return to read. The rule above is the whole note.
What this does not show
The useful question is whether the same hours work on other coins. Crypto has no closing bell, so the hour is a choice.
There is no cell to single out, and this note does not invent one. Other years, another exchange, or another fee would be a different measurement.
Questions about MASU+ Fib [BTT]
What is MASU+ Fib [BTT]?
MASU+ Fib [BTT] is a session and opening range trading strategy published on TradingView as a Pine Script. In plain terms it is a rule of the kind this site calls time of day. It can buy, and it can bet on falling prices. It is built on ADX / DMI, ATR, Bollinger Bands, Donchian Channels, EMA, Fibonacci, Pivot points, RSI, SMA, Standard deviation, VWAP, WMA, percent rank, pivot low, running total. This page reads the rules from the code and reports what they did on old crypto prices.
How does MASU+ Fib [BTT] work?
It can buy, and it can bet on falling prices. It acts only when several checks agree at once. It leans on ATR, DMI, EMA, percent rank; those names are explained on their own pages, further down. The exact line is in the list below, in the author's names, and you can skip that list. When it enters, it also sets a stop or a target, so a trade can close without a new signal.
Is MASU+ Fib [BTT] profitable in a backtest?
There is no result to judge. The rule was tried on 12 cells and never placed a trade, usually because a condition never came true on these coins and chart speeds with the author's default settings.
Where can I find the MASU+ Fib [BTT] script?
It is published on TradingView by its author. Search TradingView for the title to find the original script. This page is an independent reading and is not affiliated with the author.
What does backtest mean on this page?
Backtest means the rule was replayed on old prices from Bybit. No real money moved. Every number on this page carries that label, and old prices do not promise anything about new ones.
Words used on this page
- Backtest
- The rule was tried on old prices. No real money moved.
- Cell
- One coin on one chart speed. Bitcoin every 4 hours is one cell. Bitcoin once a day is another.
- Chart speed
- How often a new price bar is drawn. 15m means every 15 minutes, 1h means hourly, 4h means every 4 hours, 1D means once a day.
- Fee, per side
- A cost taken each time the rule trades. Per side means once on the way in and once on the way out.
- Median
- Line the cells up from the biggest loss to the biggest gain. The median is the middle one. Half the cells did better and half did worse.
- Drawdown
- The deepest fall from a high point along the way, as a percent of the account at that high.
- Above zero
- The account finished with more than it started.
The indicators MASU+ Fib [BTT] uses
Each has its own page: what it measures, how it is read, where it misleads.
- ADX and the directional movement index: how strong the trend is, not which way
- ATR (average true range): the volatility number behind most stops
- Bollinger Bands: a moving average with two standard deviations on each side
- Donchian Channels: the highest high and lowest low, and the breakout rule they define
- Exponential moving average (EMA): what it measures and where it misleads
- Fibonacci retracement levels: where the ratios come from and what a backtest can say about them
- Pivot points: swing pivots and floor-trader pivots, two different things with one name
- RSI (relative strength index): the formula, the 70/30 rule, and why it misleads in trends
- Simple moving average (SMA): the plainest average, and why it still runs half the strategies
- Standard deviation in trading: the volatility measure inside Bollinger Bands and z-scores
- VWAP: the volume-weighted average price, and why its anchor is the whole question
- Weighted moving average (WMA): linear weights, less lag, and the price of it
"MASU+ Fib [BTT]" was published on TradingView by its author, under the author's own license. This page is an independent reading of those rules and of what they did on these old prices. It is not written with the author, and it is not a recommendation. Not every detail survives the translation onto this page, so read the original before you rely on it.